horizontal oil hydraulic
Product performance characteristics:
Horizontal hydraulic machine is a specialized hydraulic machine designed and manufactured for the forming and straightening of larger parts. The machine tool structure is a horizontal C-shaped machine, with two workbenches in the horizontal and vertical directions. Horizontal hydraulic machine tools have adjustable and single cycle constant pressure and stroke, with adjustable stroke, pressure, and holding time.
This series of hydraulic presses is widely used for punching, stamping, shaping, riveting, bending, shearing, stretching of various materials, as well as the pressing and assembly of various small components. It is a multi-purpose punch machine. It is an upgraded product of the TM103C series, using advanced hydraulic circuits for both mother and son cylinders. Regardless of noise, speed, and power consumption, it is superior to ordinary hydraulic presses. The punch machine is a new generation of hydraulic presses with high efficiency, high speed, high output, and high environmental protection
Product advantages:
1. This series of hydraulic presses uses a liquid pressure of 2-20MPA as the power source, and is externally connected to a three-phase AC380V 50HZ or three-phase AC220 60HZ AC power supply
2. This series of equipment uses liquid as the medium to transmit energy, and adopts advanced hydraulic circuits for primary and secondary cylinders. The oil temperature is low, and the idle travel speed is above 150MM/s, while the working speed is below 30MM/s,
3. When the device is in standby mode and moving up and down quickly, the noise should not exceed 75 decibels
4. Adopting a sturdy open structure with integral welding, the body can maintain sufficient rigidity while providing the most convenient operating space,
5. There are two control methods: manual and semi-automatic. The pressing upper mold can be manually stopped within any range of travel, equipped with an emergency rebound button, and can also be equipped with an infrared hand protection device
The pressing stroke of this series of hydraulic press press press is generally controlled by a timer, pressure switch, position sensor, or the customer's own mold
The rebound height of the press mounted spindle can be adjusted within any travel range through a timer or position sensor
9. The pressure, stroke, holding time, and closing height can be adjusted by customers for easy operation;
10. The hydraulic system meter is built into the rack, with a clean, lightweight, and stable appearance
11. It has automatic counting function, and can also be equipped with force measuring display and intelligent temperature controller, which can be customized according to customer requirements,
12. This series of hydraulic machinery has a power range of 15tf-100 tf and various specifications for selection
